ECU Programmer

Product Details:

K -TAG ECU PROGRAMMING TOOL: -

K-TAG is the most complete and professional tool to read, write and clone an ECU or TCU on any vehicle. K-TAG communicates with all ECUs, even the latest generation ones. You can read and write directly to the ECU microprocessor, the flash memory and the EEPROM, without opening the ECU!

Additional Information:

• Item Code: masteraei
• Production Capacity: 10
• Delivery Time: 2 days
• Packaging Details: box

Product Details:

KESSv2 is an OBD tuning tool for ECUS and TCUS. The user-friendly and intuitive software is compatible with a wide range of vehicles which is constantly being updated which makes KESSV2 the most versatile remapping tool.

Product Details:

ECM can box suitable for daignosis work on the table
CANBOX is a Simulator Device Which  act has a Virtual Car or Without a Physical Car  the technician can diagnose the ECU Problems or Can program a Lost Key without having a Car.

You can connect Various units like ECU ,METER,IMMOBILIZER ,BCM. A perfect Device for Diagnose Car Problems Without having a Car.

                          

Successfully  Key Programmed with CANBOX  Below Car's

 Maruti ID 65              : Van,Wagon-R,Alto,Zen Estilo,800

Maruti ID 40               : Swift Diesel 2008-2009

Maruti Petrol ID 46   : Alto 800,,Alto K-10, Van Wagon-R,Swift,Ritz,Sx4,Ertiga

Maruti Diesel ID 46   : Swift, Ritz,  2010-2011

Maruti Diesel ID 46   : Swift, Ertiga, 2012-2015

Mahindra ID 46         : Bolero ,Xylo(All Series),Gino ,Scorpio,

Mahindra ID 47         : XUV 500,TUV,KUV

SKODA/VW ID 48      : LAURA,FABIA,OCTAVIA,VENTO,RAPID

Toyota ID 67              : Innova

   Almost all ECU/ECM/BCM/IMMOBILIZER can be diagnose/Key Programmed  

 

Packaging Content:

1x1 CANBOX Unit

1x1 Universal Wiring Adapter

1x1 Toyota Wiring Adapter

1x1 12V DC Power Adapter

1x1 Wiring Diagram Book ( more than 80+ ECM/BCM ,Immobilizer Wiring Diagram)

Additional Information:

• Item Code: AEICAN2
• Production Capacity: 10
• Delivery Time: 1-2DAYS
• Packaging Details: BOX

Product Details:

Hexprog Chip Tuning is the professional tool you will need to repair, clone and make chip tuning for wide range of Ecus/Tcus.

Hexprog covers a wide range of Ecus and Tcus from different manufacturers and different brands  Hexprog Key Features
 Master version. One License for all protocols On bench and OBD.
 Supports one of the largest Ecu/Tcu list in Cars and Trucks.
 Reads all BMW long ISN from BMW DME and DDE including MD1 and MG1 in F/G series.
 Supports online services like IMMO OFF, DPF OFF, EGR OFF, Addblue,...etc.
 All adapters and modules are included when you order Hexprog. On Bench Chip Tuning/Ecu Cloning
You can read and write P-Flash, D-Flash, External Flash, and external EEPROM with the option of automatically checksum correction, you will have two methods in most of Ecus:

Factory mode: with this option you don’t have to open the Ecu cover. Just plug some wires for power and signals and you are ready to go.
Boot mode: Opening the Ecu is mandatory to connect the boot wire on the Ecu board. This method is useful when the Ecu is not responding.  BD Chip tuning
Hexprog starts supporting OBD functions in early 2021, It supports read/write the map area, (virtual read is supported too). It also includes important functions in some Ecus, like VIN Changing, Coding backup/restore and Fault codes read/erase.

Microtronik has a vast experience in all types of car Ecus flashing and coding, we deployed this experience in Hexprog to produce one of the safest programming tools by OBD.

Additional Information:

• Item Code: AEIHEX
• Production Capacity: 5
• Delivery Time: 1 DAY
• Packaging Details: BOX

Product Details:

ECM can box suitable for daignosis work on the table
CANBOX is a Simulator Device Which  act has a Virtual Car or Without a Physical Car  the technician can diagnose the ECU Problems or Can program a Lost Key without having a Car.

You can connect Various units like ECU ,METER,IMMOBILIZER ,BCM. A perfect Device for Diagnose Car Problems Without having a Car.

                          

Successfully  Key Programmed with CANBOX  Below Car's

 Maruti ID 65              : Van,Wagon-R,Alto,Zen Estilo,800

Maruti ID 40               : Swift Diesel 2008-2009

Maruti Petrol ID 46   : Alto 800,,Alto K-10, Van Wagon-R,Swift,Ritz,Sx4,Ertiga

Maruti Diesel ID 46   : Swift, Ritz,  2010-2011

Maruti Diesel ID 46   : Swift, Ertiga, 2012-2015

Mahindra ID 46         : Bolero ,Xylo(All Series),Gino ,Scorpio,

Mahindra ID 47         : XUV 500,TUV,KUV

SKODA/VW ID 48      : LAURA,FABIA,OCTAVIA,VENTO,RAPID

Toyota ID 67              : Innova

   Almost all ECU/ECM/BCM/IMMOBILIZER can be diagnose/Key Programmed  

 

Packaging Content:

1x1 CANBOX Unit

1x1 Universal Wiring Adapter

1x1 Toyota Wiring Adapter

1x1 12V DC Power Adapter

1x1 Wiring Diagram Book ( more than 80+ ECM/BCM ,Immobilizer Wiring Diagram)

Additional Information:

• Item Code: CAN2
• Production Capacity: 5
• Delivery Time: 1 DAY
• Packaging Details: BOX

Product Details:

SM2 PRO J2534 VCI Functions:1. Read and write ECU data2. ECU clone3. ECU parameter adjustment4. ECU maintenance engineering5. Chip turing6. Read ECU maps7. Checksum correction8. Stage1-3, gearbox tuning , LC, sportdisplay , immo off, adblue off, dpf off, dtc off ,vmax ,swirl off 9. Read flash and ep files10. Powertrain adjustment11. Support online update12. VR files supply 13. Pinout comewith14. Helpdesk and tuner account 15. OBD2 reading16. Cover-free wielding-free no disassembly data reading, greatly reduce the risk of destroying the ECU, bench mode.17. Cover-opening data reading, boot mode

200 Newly-added Bosch MED/EDC17 Read/Write Protocols Without Opening the Cover.
VAG Simos 12.1, 12.2
VAG Simos PCR2.1 
FCA GPEC2, GPEC2A, GPEC4, GPEC4LM
Hyundai/KIA SIM2K-240, SIM2K-241,SIM2K-250, SIM2K-251, SIM2K-260, SIM2K-305, MT86
Ford/LR SID208 Flash read
Scania EMS S8 BAM. Just 3 point PCB connection into VIA holes. Can be connected without removing gel.
PSA SID208
MB SID307, SID310
Renault SID307, SID309, SID310
Porsche SDI21.x
Mitsubishi E6T83XXX, E6T32xxx
Isuzu Transtron SH72544R
Isuzu Transtron L4.3
Hino EDC7UC31
Hyundai, Greatwall DCM6.2AP
Coming Soon:
VAG Simos 18.1, 18.2
VAG Simos 18.10
FCA Marelli 8GMK/8GML, MJ9DF, 10GF
FAL Marelli MJ8DF/8F2, 8GMB/8GMC/8GMF/8GMW/8GSF/8GSW
BMW MSD80, MSV80, MSD81, MSD85.0/MSD85.4, MSD85.1/MSD85.3, MSD87.1/MSD87.2, MSV90
Important update:
1.Our original SM2 PRO already update to version 2.21.21,November 25, 2022 hardware!
2.Our bench cable already update to 3 led bench cable

Additional Information:

• Item Code: PRO2
• Production Capacity: 10
• Delivery Time: 1 DAY
• Packaging Details: BOX

Product Details:

AUTOMOBILE EXPERT INDIA Presenting
calterm 5.12 latest version software for calibraction & update ECM IN TATA CUMMING & LEYLAND VEHICAL INCLUDING BS4 BS6.

Installation via remote access

The new version of Calterm is an engineering development and test tool used to monitor the ECM (Electronic Control Module) for the Cummins engine system and to change the calibration data contained therein. This is a Cummins engineering software package designed to develop, program and test various Cummins ECUs. It's a very powerful solution for chip tuning, but you should know what you're doing and how the changes you make can affect engine performance. WARNING: This software package is intended for use by qualified Cummins technicians. You can damage the ECU or even the engine itself if you misuse this software. All responsibility for such damage rests with the user. Purpose The electronics engine development process requires PC support tools that interface with the electronics subsystem and its various feature sets. Calterm is used to increase the productivity of engineers who develop electronic engine features by providing diagnostics, simulation and value manipulation capabilities for Electronic Control Modules (ECMs).

Calterm is a Windows-based software tool that provides Cummins engineers with the ability to perform Cummins ECU calibration, tuning, testing and reflow development in the engineering environment. Calterm also provides support for industry standard protocols (XCP/UDS) for communicating with non-Cummins ECMs and smart devices.

Additional Information:

• Item Code: CALTERM5.12
• Delivery Time: SAME

Product Details:

Odometer toolProduct DescriptionCheap V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire KitTop Reasons To Get V4.94 Digiprog3 Odometer Master Programmer Feature:1. This is newest version Digiprog3 with most competitive price.2. Newest Version: V4.943. Worldwide leader in digital speedo programming and correction software.4. Years of experience in digital vehicle engineering.5. Professional technical service.
Digiprog 3 V4.94 Other Features:Service Interval Adjustments and SettingsAssyst processingFault memory read-eraseEEPROM programmerIntegrated PC communication
Digiprog 3 Menu:1. EEPROM MenuThe first option on the main menu is the Eeprom menu. Reading, writing and saving eeprom 2. CAR/TRUCK MenuThis is the menu you will use for correcting and reprogramming vehicles.3. Motorcycle MenuThis menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.4. Special Functions MenuThe special functions menu is for use only by official DigiProg dealers.
4. Fits models:
For Audi A2/A3/A4/A6 VDO-2011 / A5 / A7 / TT 1998-2007 (8N) / TT 2007- (8J)
For Bentley Continental GT ALL 2003/ 2011
For BMW 1er / E81/E82/E87/E88 CAS3 / 3er / E90/E93 CAS3 / 5er / 60/E61 CAS3 / 6er / E63/E64 CAS3 / X5er / E70 CAS3 / X6er / E71 CAS3
For Mercede-Benz E-Class Tacho (W212) 07/2007- / E-Class EZS(W212) 07/2007- / E-Class (W212) Assyst / CLR error
For Chevrolet Camaro / Cruze
For Chrysler All Models
For Dodge Caravan 2007- / Challenger / Journey / Magnum / Nitro / Ram 2003-2006
For Fiat 500 / Bravo 2005-2007 / Croma 2005-2007 / Doblo -2007
For Ford Cmax / Connect / Escape 2007- / Fiesta 2001-2008
For Jeep Cherokee 2008- / Commander
For MINI Cooper CAS 2007-
For Opel Astra 2009- / Corsa / Insgnia
For Porsche 911 (996) / Cayman (987)
For Land Rover 75 Light Module
For Seat Altea / Arosa
For Skoda Octavia / Superb
For Volvo V70 2008- / XC60 2008-
For Volkswagen Sharan / T4 1998-
5. Supported Languages: Deutsch, English, Espanol, French, Portuguese,Italiano,Turkey , Nederlands.
6. Other features:
Service interval adjustments and settings
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC commun

Additional Information:

• Item Code: DIGIPROG3
• Production Capacity: 10
• Delivery Time: 2 DYAS
• Packaging Details: BOX

Product Details:

ECU Chip Tuning for cars by OBDSave around 400$ to get all functionsSupports Volkswagen Audi read/write/cloneSupports Honda, Toyota, Kia, Hyundai, some Ford, Volkswagen etcCovers all functions of ktm flash, ktm bench and ktm obd
KTMFLASH KTMBENCH KTMOBD 3 in 1  ECU Connection Way
1. Read and write ECU by Boot1. Read and write ECU on Bench (No need disassembling)
EMT(ECU MARST TOOLS) Liet Module 12 Honda/Acura CAN-bus Honda: Honda PGM-FI Generic Read-OnlyHonda: Honda AT/CVT/DCT Generic Read-Only PGM-FI (Keihin SH7058/1MB)PGM-FI (Keihin SH72543/2MB)PGM-FI (Keihin SH72546/3.75MB)PGM-FI (Keihin MPC5566/3MB)PGM-FI (Keihin TC1782/2.5MB)AT/CVT/DCT (Keihin 512KB)AT/CVT/DCT (Keihin 1MB)   (Matsushita SH7058/1MB)PGM-FI (Matsushita SH72543/2MB)PGM-FI 2013+ (Matsushita SH72543/2MB) (Test)PGM-FI (Panasonic TC179X/4MB)AT/CVT/DCT (Matsushita 512KB) (Test) Honda: PGM-FI (Continental MPC5554/2MB)  PGM-FI (Hitachi SH7058/1MB) (Test)PGM-FI (Hitachi SH7059/1.5MB) (Test)PGM-FI (Hitachi SH72543/2MB)PGM-FI (Hitachi MPC5554/2MB) (Test)AT/CVT/DCT (Hitachi SH72531/1280KB)AT/CVT/DCT (Hitachi SH725x3/2048KB)Reading, writing, checksum correction.Module 13Honda/Acura K-Line  Honda: Accord 7 2003-2005 (Matsushita RBA/RBB SH7055/512KB)Honda: Accord 7 2006-2007/TSX 2004-2005 (Matsushita RBA/RBB SH7055/512KB) Acura: TSX 2006 (Matsushita RBB A56-A62 SH7058/1MB)Honda: Accord/CR-V/Element/Legend/Odyssey/Ridgeline (Keihin SH7058/1MB)Honda: Element/Inspire (Keihin SH7055/512KB) Honda: Legend/Acura TL 2005-2007 (Keihin RJA SH7058/1MB)Honda: CR-V 2002/2005-2007 (Keihin PPA/PNL SH7058/1MB)Honda: Fit/Jazz/Airwave 2001-2007 (Keihin OKI ML66Q592/192KB)Acura: MDX 2003-2007 (Motorola RDJ SH7055/512KB)Honda: Accord 7 USA (Motorola RCA SH7055/512KB SH7058/1024K)Only writing, checksum correction. Stock files database included!Module 14Petrol engines 1.6L, 2.0L, 2.3L, 2.5L Ford Mondeo 4  Ford Mondeo 4: 1.6L Sigma Ti-VCT 110/125PS (EMS2101)Ford Mondeo 4: 2.0L Duratec HE (ESU312 Galaxy/S-Max 2006)Ford Mondeo 4: 2.0L, 2.3L Duratec HE (ESU412/415)Reading, writing, checksum correction. Ford Mondeo 4: 2.5L Duratec I5 225PS (ME9.0)Only writing, checksum correction. VBF writing and VBF to BIN conversion is supported! Module 19Kia/Hyundai Kia/Hyundai: 1.4L, 1.6L (M(G)7.9.8)Kia/Hyundai: 1.1L-1.6L (M(G)7.9.7)Only writing, checksum correction. Kia/Hyundai: 1.4L, 1.6L (ME17.9.11/12/13)Kia/Hyundai: 1.4L, 1.6L (ME(G)17.9.21)Kia/Hyundai: 1.6L, 3.0L (ME17.9.2/ME(D)(G)17.9.8)Reading, writing, checksum correction.Module 20Ford Focus 2/Fiesta/Fusion (automatic transfer for VID area)  Ford Focus 2: 1.4L, 1.6L Duratec 85/100/115PS (SIM28/29)Ford Focus 2: 1.8L, 2.0L Duratec HE 125/145PS (ESU131/411/418) Ford Focus 2: 1.8L, 2.0L Duratorq Lynx/DW10C (SID202/SID206)Ford Fiesta/Fusion: 1.4L, 1.6L Duratec 85/100PS (SIM210)Ford Focus 2 ST: 2.5L Duratec I5 225PS (ME9.0) Reading, writing, checksum correction. Ford Kuga 1: 2.5L Duratec I5 200PS (ME9.0)Writing, checksum correction. Module 21Ford USA (automatic transfer for VID area)  Mazda6 3.0L AJ 2003-2005 Escape, Explorer, Mazda CX9 -2009 (PCM150F) Explorer, Mazda CX9 2010-2011/2012 (M799G) Focus 2008-2011 (GreenOak/PCM190) Escape, Mariner, Tribute 2009-2011 (9L8A) Ford F350 6.0L (BlackOak/PCM122/448KB)Expedition, Navigator 5.4L (Bosch ME9.8/2048KB)F-150 5.4L (Bosch MEG9.8.1/2536KB)Reading, writing, checksum correctionMustang 2005-2009 (PCM170F)Reading, writing.

Additional Information:

• Item Code: AEI3IN1
• Production Capacity: 50
• Delivery Time: 2 DAYS
• Packaging Details: BOX

Product Details:

Product DescriptionPRICES DEPEND ON YOUR KESS3 SOFTWARE PROTOCOLS
Available ProtocolsCar – LCV OBD Protocols activation Bike – ATV & UTV OBD Protocols activation Agriculture – Truck & Buses OBD Protocols activation Marine & PWC OBD Protocols activation Car – LCV Bench-Boot Protocols activation Bike – ATV & UTV Bench-Boot Protocols activation Agriculture – Truck & Buses Bench-Boot Protocols activation Marine & PWC Bench-Boot Protocols activation 
ALIENTECH KESS 3 HARDWARE
Alientech KESS 3 Hardware. The new kess3 tuning tools from Alientech. KESS 3 is an OBD and Bench tuning / Boot tuning and ECU remapping tool.
The super fast new KESS 3 is set to change the tuning and remapping industry. With superfast ECU remapping processing. As well as flexible options for software and protocols. It is certain to make the new Alientech Kess 3 tuning tool the market leader.
This item is the basic Alientech KESS 3 Hardware. The hardware is neither master nor slave by definition when new. The Alientech KESS 3 Hardware unit is self can be assigned either master tuning or slave tuning and remapping protocols.
So the first step is to purchase the KESS 3 hardware unit and then select the protocols from the shop to complete the activation of your tuning tool

OBD Mode. With the OBD mode, you can easily access all the ECU data through the diagnostic socket.BENCH mode is a simple interface for logging in, and you have full access to your ECU data.BOOT mode – This mode allows access to all areas of system data. Read, write and clone.Configure KESS3 to suit your needs and your work. Regardless of your level and experience, KESS3 gives you the best experience in engine programming.

 

REGARDING
AUTOMOBILE EXPERT INDIA
RAIPUR CHHATTISGARH

Additional Information:

• Item Code: AEIALTKESS3
• Production Capacity: 5
• Delivery Time: 2 DAYS
• Packaging Details: BOX

Multi - language environment can be applied in different countries and regions.The main unit system adopts ARM high speed chip to keep it running fast, stable and anti -jamming.Updating via SD card at any moment.Modern design and high-def inition true color screen realize the integration of automotive industry and electronic  information technologies and make auto diagnosis and key programming easier, practical and economical.DurabilityIntegrity structure design makes it crack resistance, shock resistance and durable.Industrial design ensures the tool work stably under tough environment, such as high and low temperatures.
Package Including:1pc x  X300 M main unit1pc x  Main cable1pc x  SD card (Host memory card)1pc x  SD card reader1pc x  X300 M user's manual1pc x  OBDII-16 connector

Product Details:

THIS CABLE IS REQUIRED FOR ON TABLE ECM READ WRITE & PROGRAMMER WORK IN TATA CUMMING TRUCK ECM.
 

REGARDING
AUTOMOBILE EXPERT INDIA
RAIPUR CHHATTISGARH

Additional Information:

• Item Code: AEIFLASHING
• Production Capacity: 10
• Delivery Time: 1 DAYS
• Packaging Details: BOX

Product Details:

THIS CABLE IS REQUIRED FOR ON TABLE ECM READ WRITE & PROGRAMMER WORK IN TATA CUMMING TRUCK ECM.
 
AUTOMOBILE EXPERT INDIA
RAIPUR CHHATTISGARH

Additional Information:

• Item Code: AEIBS4
• Production Capacity: 25
• Delivery Time: 1 DAYS
• Packaging Details: BOX

Product Details:

Installation via remote access
 The new version of Calterm is an engineering development and test tool used to monitor the ECM (Electronic Control Module) for the Cummins engine system and to change the calibration data contained therein.  This is a Cummins engineering software package designed to develop, program and test various Cummins ECUs. It's a very powerful solution for chip tuning, but you should know what you're doing and how the changes you make can affect engine performance. WARNING: This software package is intended for use by qualified Cummins technicians.  You can damage the ECU or even the engine itself if you misuse this software.  All responsibility for such damage rests with the user.  Purpose The electronics engine development process requires PC support tools that interface with the electronics subsystem and its various feature sets.  Calterm is used to increase the productivity of engineers who develop electronic engine features by providing diagnostics, simulation and value manipulation capabilities for Electronic Control Modules (ECMs).
 Calterm is a Windows-based software tool that provides Cummins engineers with the ability to perform Cummins ECU calibration, tuning, testing and reflow development in the engineering environment.  Calterm also provides support for industry standard protocols (XCP/UDS) for communicating with non-Cummins ECMs and smart devices.

Additional Information:

• Item Code: AEI04
• Production Capacity: 100
• Delivery Time: SAME TIME
• Packaging Details: ONLINE

Product Details:

KT200 ECU Programmer Multiple Protocols-Auto Support ECU Maintenance DTC Code Removal/JTAG Chip TuningKT200 ECU Programmer reads and writes ECU & TCU FLASH and EEPROM in OBD, Bench, Boot Mode, and BDM/JTAG.KT200 ECU Programmer made by ChipTuningKit covers ECU and TCU for cars, trucks, motorcycles, tractors, and boats. Does KT200 ECU Programmer have versions? And what is the Difference between them?KT200 ECU Programmer hive 2 Type Version:Auto Version: OBD function is limited, do not support motorcycles, tractors, or boats by OBD function.Full Version: All configurations are unlimited  Minimum Recommended Requirements:CPU > 2.5 GHz (Intel i5, i7)RAM > 8GB   KT200 ECU Programmer Features:KT200 ECU Programmer covers up to 5400 ECUs, and over 500 BTUs.Support Audi/VW ECU cloning via pinout mode.Bosch EDC17, MED17 / ME17, and SIEMENS Pcr2.1 (also with Pinout open) to read and write in Bench mode.Chip Tuning Kit KT200 ECU Programmer Vehicle List is constantly updated and stays ahead of the industry.The KT200 ECU programmer software allows you to write (forced cloning)Without testing forcibly and supports forced reading and writing of unknown ECUs with supported chip models.Covering a full range of German, ECU programmer, Japanese, American, and Chinese models.Supports OBD BOOT BDM JTAG modeThe same as KTM200/ECUTunerRead and write ECU/TCU dataSupports large amounts of TCUs, i.e Volvo MPS6, VAG DQ400e/SQ100, Jeep 9H28 TCUsSupports VR ReadingTRW EMS 2.2 EMS 2.3, EMS S8, PCR 2.1 OBD unlock, etc tested working  Chip Tuning Kit KT200 ECU Programmer Functions:ECU/TCU CloningRead and write ECU dataECU maintenance engineeringRead and write the whole ECU/ECU dataRead OBD2 (Currently supports 2008-2020 vehicles only)Checksum correctionRead and write default dataSupports online updateRead and write the entire TCU (Micro + EEPROM)It must work online (online access server)ECU Remapping

Additional Information:

• Item Code: AEIKT200
• Production Capacity: 10
• Delivery Time: 1 DAY
• Packaging Details: BOX